Our offer

What does the perfect enclosure for your swimming pool look like?

Our offer

What does the perfect enclosure for your swimming pool look like?

Our telescopic swimming pool enclosures are always a perfect fit, everywhere!

At CoverSwim, we deliberately opted to design our telescopic pool enclosures as a three-point model with straight profiles and a pointed roof construction. This angular design looks sleek and trendy; it ensures maximum stability and it is the most suitable shape for our climate.

The 3-angle model guarantees the optimal distribution of lateral forces. Since our profiles are straight and not bent, our aluminium alloy also offers optimum tensile strength. As a result, the telescopic swimming pool enclosure is particularly stable and sturdy.

Thanks to our patented profiles, we don’t even need floor tracks for your swimming pool enclosure to slide open! The sliding guides are simply integrated in the cross sections.

A lot of thought has also gone into the pitch of the pointed roof. It is approximately 5 degrees and holds condensation drops. With steeper gradients, they drip down. At a right angle, the uprights don’t allow dirt or rainwater to accumulate. This makes them maintenance-friendly and keeps them transparent for longer.

In short, the model with three angles is a well-thought-out choice and we’d rather stick to it. Apart from that, how will the telescopic enclosure for your swimming pool look like? Up to you to decide.

A free-standing enclosure for your swimming pool or built onto your house?

For a swimming pool in the garden, a free-standing pool cover is the logical choice. However, if your swimming pool is right next to your house or a pool house, there are also mounting options such as perpendicular or lateral. One side of the roof is mounted against the building. This saves space and in most cases also an extra covered or extended terrace. In this way you can, for example, also immediately have your jacuzzi covered.

Free-standing

The telescopic swimming pool cover is installed around your swimming pool and curbs. The extendable construction can also be made slightly wider or longer. For example, you can also create a covered terrace area.

Extension

For swimming pools that are placed perpendicular to an outside wall, the extension model is best suited. Here the roof is placed against the facade of the house or the pool house. The elements then slide in or out perpendicular to the wall.

Mural

A mural enclosure is also placed against an outside wall. However, only one side slides over the terrace floor. The elements slide in or out sideways. This option is ideal for swimming pools that are placed parallel with an outside wall.

If your swimming pool is completely enclosed between 2 walls, the telescopic roof can also be placed on top of these walls. This keeps the entire floor space free.

We make to measure, so almost every imaginable size is possible

Our telescopic swimming pool enclosures consist of various elements that can be expanded modularly. The 3 m x 2.10 m elements are standard. Since we produce the whole elements in our own workshop, however, customized work with different dimensions is also possible. We can even produce up to 9 m long elements.

How does the swimming pool enclosure open/close?

To open or close the front and rear of the pool enclosure, you can choose between different systems:

In fixed wall with a traditional single or double door system.

Independent panels:
various panels can be pushed independently to the side of their element. This system is usually combined with a lockable sliding door.

Garage door principle:
tilts open towards the roof and, in open position, hangs horizontally above the swimming pool to free the whole front section.

Spring system:
the best way to describe this system is to compare it with the boot lid of your car. The system folds open in a tilting movement.

Accordion: from the centre, accordion panels can be folded open to the sides.

Additional doors and windows can be added in the side panels on request. If you don’t want to have to open the entire roof or the door system every time you get into the pool, then a hatch with a spring system in one of the roof panels of a low enclosure is also a very good option.

You can even decide the sliding direction

In a telescopic swimming pool enclosure, the lower parts need to slide under the higher parts, but the other way round is also perfectly possible. In that case, the low parts remain in place, while the higher elements slide over them.

Or would you rather have your swimming pool enclosure slide from the middle out to the sides? You can also create a central opening with the retracted elements remaining on the sides.

From left to right or right to left? You tell us. And which side should never move? Any sliding direction, and that whatever the element, is possible.

Other options & extras

Manual or motorized operation?
Mounted on stainless steel bearings, with a large diameter and milled out in a flexible trackway, the wheels encounter only minimal friction due to dirt deposits, for example. Consequently, one person can manually open even larger enclosures easily, quietly and in a straight line. For even smoother manual operation, however, a floor track guiding system is also possible. In addition, a motorized system is an option. In this case a 12V system powered by a battery and solar panels is connected to the roof of the enclosure. You can then open or close the enclosure automatically at the push of a button or using the remote control.

Single-walled, transparent roof sheeting or energy-efficient, double-walled panels?
As standard, the side panels are made of 4 mm thick hyper scratch-resistant, maintenance-friendly and transparent polymethacrylate panels. For the roof, we’ve chosen 6-mm thick polycarbonate sheets. They have perfect flexibility and are impact-resistant and hail resistant. When these are installed single-walled, they are transparent and will cause the swimming pool to warm up by 7 to 10°C due to the greenhouse effect. However, if we install the sheeting double-walled, you will lose some transparency while obtaining a matt look, but the temperature will increase by a few degrees more. A double-walled roof will heat up the water by between 9 and 13°C.At your request, however, we can also use the polymethacrylate sheets from the sides as a roof sheeting. We will always recommend double-walled roof polycarbonate sheeting, though. It is in fact the combination of 4 mm thick side walls and 2 x 6 mm thick roof sheeting that will produce maximum greenhouse effect.

Colour choice?
You can choose from different RAL colours for the colour of the profiles.

Ready to create an enclosure for your swimming pool with us?

You’ve read it: there are a lot of possibilities and options to create the telescopic swimming pool enclosure of your dreams. Since all the parts are also manufactured in our own country and in our own in-house workshop, even exceptional customization is possible.

Are you convinced now, and curious about the price tag? You just need to contact us and we will come to you free of charge and without obligation to provide you with a customized quotation for a telescopic pool enclosure to suit your wishes.

free
offer

and without obligation
in belgium, the netherlands and france!

  • This field is for validation purposes and should be left unchanged.
Menu